Full automatic large-size slag remover_Complete set of equipment_Product introduction_Products

Full automatic large-size slag remover

Dejunk & Trim T6000

equipment characteristics

High speed punching (200 times / min)

Feeding visual inspection

High precision real-time detection

Automatic up and down receiving mechanism

	Project	Unit	T6000
Essential information	Machine size (length * width * height)	mm	198010801726
	Machine weight	ton	1.5
	noise	Decibel	<55
	Punching/min	Times / minute	200
Basic ability	Track working range	mm	W：30-110 L：180-300
	Maximum processed product	mm	100*300
	Number of loading and unloading boxes	pcs	2
	Allowable warpage of machined parts	mm	X:≤8 Y:≤4
	Transmission form	(servo / CAM)	Belt / rail / servo
	Reverse (positive or negative or 180 °)	-	Camera
	Punching mode	deg	V
Vision system	direction	min	V
Vision system	Discharge quality	-	V
Change machine	Time	-	＜15
Change machine	Gear selection mode	-	Manual + toolingid identification
Power specification	Power Supply	-	AC380V/50-60HZ/15KVA
Power specification	Gas source	-	Pressure: 0.6MPa Flow: 1000L / min
environment condition	room temperature	℃	20-25
environment condition	humidity	-	<70% (non condensing)

Automatic injection molding and packaging machine

Coater (under research)

Full automatic large-size corner forming machine

Laser marking machine